Recently Completed


Browse By Group:




New Publications

This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA’s Online store.
Program Standard Title Date Posted Scope
Communications / Information  CAN/CSA-ISO/IEC 23001-4:18  Information technology — MPEG systems technologies — Part 4: Codec configuration representation
(ISO/IEC 23001-4:2017, IDT)
10/17/2018   
Communications / Information  CAN/CSA-ISO/IEC 23002-2:18  Information technology — MPEG video technologies — Part 2: Fixed-point 8×8 inverse discrete cosine transform and discrete cosine transform
(ISO/IEC 23002-2:2008, IDT)
10/17/2018   
Construction Products and Materials  CAN/CSA-B127.3-18  Fibrocement drain, waste, and vent pipe and pipe fittings
10/17/2018   
Communications / Information  CAN/CSA-ISO/IEC 10116:18  Information technology — Security techniques — Modes of operation for an n-bit block cipher
(ISO/IEC 10116:2017, IDT)
10/3/2018   
Communications / Information  CAN/CSA-ISO/IEC 14496-15:18  Information technology — Coding of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in the ISO base media file format
(ISO/IEC 14496-15:2017, IDT)
10/3/2018   
Communications / Information  CAN/CSA-ISO/IEC 14543-5-8:18  Information technology — Home electronic system (HES) architecture — Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 — Remote access core protocol
(ISO/IEC 14543-5-8:2017, IDT)
10/3/2018   
Communications / Information  CAN/CSA-ISO/IEC 14543-5-9:18  Information technology — Home electronic system (HES) architecture — Part 5-9: Intelligent grouping and resource sharing for HES Class 2 and Class 3 — Remote access service platform
(ISO/IEC 14543-5-9:2017, IDT)
10/3/2018   
Communications / Information  CAN/CSA-ISO/IEC 14776-262:18  Information technology — Small Computer System Interface (SCSI) — Part 262: SAS Protocol Layer — 2 (SPL-2)
(ISO/IEC 14776-262:2017, IDT)
10/3/2018   
Communications / Information  CAN/CSA-ISO/IEC 14776-323:18  Information technology — Small computer system interface (SCSI) — Part 323: SCSI Block Commands — 3 (SBC-3)
(ISO/IEC 14776-323:2017, IDT)
10/3/2018   
Communications / Information  CAN/CSA-ISO/IEC 18013-2:18  Information technology — Personal identification — ISO-compliant driving licence — Part 2: Machine-readable technologies
(ISO/IEC 18013-2:2008, IDT)
10/3/2018   
Communications / Information  CAN/CSA-ISO/IEC 18013-3:18  Information technology — Personal identification — ISO-compliant driving licence — Part 3: Access control, authentication and integrity validation
(ISO/IEC 18013-3:2017, IDT)
10/3/2018   
Communications / Information  CAN/CSA-ISO/IEC 18013-4:18  Information technology — Personal identification — ISO-compliant driving licence — Part 4: Test methods
(ISO/IEC 18013-4:2011, IDT)
10/3/2018   
Communications / Information  CAN/CSA-ISO/IEC 20000-6:18  Information technology — Service management — Part 6: Requirements for bodies providing audit and certification of service management systems
(ISO/IEC 20000-6:2017, IDT)
10/3/2018   
Communications / Information  CAN/CSA-ISO/IEC 21000-21:18  Information technology — Multimedia framework (MPEG-21) — Part 21: Media contract ontology
(ISO/IEC 21000-21:2017, IDT)
10/3/2018   
Electrical / Electronics  CAN/CSA-C22.2 No. 62841-2-17:18  Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-17: Particular requirements for hand-held routers
(IEC 62841-2-17:2017, MOD)
9/28/2018   
Electrical / Electronics  CAN/CSA-C22.2 No. 62841-2-17:18  Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 2-17 : Exigences particulières pour les défonceuses portatives
(IEC 62841-2-17:2017, MOD)
9/28/2018   
Electrical / Electronics  CAN/CSA-C22.2 No. 62841-3-10:16  Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 3-10 : Exigences particulières pour les tronçonneuses à disque transportables
(IEC 62841-3-10:2015, MOD)
9/21/2018   
Energy  Z316.8-18  Exigences concernant la conception, le développement et la validation d’essais conçus en laboratoire pour le dépistage, le diagnostic et la gestion des conditions cliniques
Norme nationale du Canada
9/5/2018   
Electrical / Electronics  CAN/CSA-C22.2 nº 62841-2-14:16  Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 2-14 : Exigences particulières pour les rabots portatifs
9/5/2018   
Electrical / Electronics  CAN/CSA-E60730-2-9:18  Automatic electrical controls — Part 2-9: Particular requirements for temperature sensing controls
8/30/2018   
Life Sciences  Z463-18  Maintenance of electrical systems
8/30/2018   
Electrical / Electronics  C22.2 NO. 250.0-18  Luminaires
8/30/2018   
Construction Products and Materials  CAN/CSA-S852-18  Blast-resistant window anchor systems
8/28/2018   
Electrical / Electronics  C22.10-18  Québec Construction Code, Chapter V - Electricity - Canadian Electrical Code, Part I with Québec Amendments
8/28/2018   
Electrical / Electronics  C22.10-18  Code de construction du Québec, Chapitre V - Électricité - Code canadien de l'électricité, première partie et modifica tions du Québec
8/28/2018   
Life Sciences  Z259.10-18  Full body harnesses
8/28/2018   
Electrical / Electronics  C22.2 No. 68-18  Motor-operated appliances (household and commercial)
8/28/2018   
Electrical / Electronics  C22.2 No. 213-17, Update No. 1  Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations
Revised Title page, copyright page, and Clauses 5.1.1 and 18.3.4
8/28/2018   
Energy  N285.0-17/N285.6 Série-17  Exigences générales relatives aux systèmes et composants sous pression des centrales nucléaires CANDU/Normes sur les matériaux des composants de réacteurs des centrales nucléaires CANDU
8/22/2018   
Energy  N285.0.1-18  Commentary on CSA N285.0-17, General requirements for pressure-retaining systems and components in CANDU nuclear power plants
8/22/2018   
Environment  R7007-18  Sustainability standard for household microwave oven appliances
8/22/2018   
Life Sciences  Z1003.1-18  Santé et sécurité psychologiques dans les organismes de services paramédics
8/22/2018   
Life Sciences  Z8000-18  Canadian health care facilities
This is a National Standard of Canada
8/1/2018   
Electrical / Electronics  CAN/CSA-C22.2 No. 111-18  General-use snap switches
8/1/2018   
Construction Products and Materials  B108-18  Natural gas refuelling stations installation code
This is a National Standard of Canada
7/27/2018   
Construction Products and Materials  ASME A112.18.1-2018/CSA B125.1-18  Plumbing supply fittings
7/27/2018   
Construction Products and Materials  ASME A112.19.1-2018/CSA B45.2-18  Enamelled cast iron and enamelled steel plumbing fixtures
7/27/2018   
Construction Products and Materials  ASME A112.19.2-2018/CSA B45.1-18  Ceramic plumbing fixtures
7/27/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 49-18  Flexible cords and cables
7/27/2018   
Electrical / Electronics  CAN/CSA-C300-18  Energy performance and capacity of household refrigerators, refrigerator-freezers, freezers, and miscellaneous refrigeration products
7/27/2018   
Electrical / Electronics  CAN/CSA-IEC 61000-6-2:18  Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
(Adopted IEC 61000-6-2:2016, third edition, 2016-08)
7/25/2018   
Electrical / Electronics  CAN/CSA-IEC 61000-6-2:18  Compatibilité électromagnétique (CEM) - Partie 6-2: Normes génériques - Immunité pour les environnements industriels
(norme IEC 61000-6-2:2005 adoptée, deuxième édition, 2005-01)
7/25/2018   
Energy  B339-18  Cylinders, spheres, and tubes for the transportation of dangerous goods
7/25/2018   
Energy  B339-18  Bouteilles à gaz cylindriques et sphériques et tubes pour le transport des marchandises dangereuses
7/25/2018   
Energy  B340-18  Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, Class 2
7/25/2018   
Energy  B340-18  Sélection et utilisation de bouteilles à gaz cylindriques et sphériques, tubes et autres contenants pour le transport des marchandises dangereuses, classe 2
7/25/2018   
Energy  B341-18  UN pressure receptacles and multiple-element gas containers for the transport of dangerous goods
7/25/2018   
Energy  B341-18  Récipients à pression UN et conteneurs à gaz à éléments multiples destinés au transport des marchandises dangereuses
7/25/2018   
Energy  B342-18  Selection and use of UN pressure receptacles, multiple-element gas containers, and other pressure receptacles for the transport of dangerous goods, Class 2
7/25/2018   
Energy  B342-18  Sélection et utilisation des récipients à pression UN, des conteneurs à gaz à éléments multiples et d’autres récipients à pression pour le transport des marchandises dangereuses, classe 2
7/25/2018   
Construction Products and Materials  CSA B45.8-18/IAPMO Z403-2018  Terrazzo, concrete, composite stone, and natural stone plumbing fixtures
7/25/2018   
Construction Products and Materials  ASME A112.3.4-2018/CSA B45.9-18  Macerating toilet systems and waste-pumping systems for plumbing fixtures
7/25/2018   
Electrical / Electronics  CAN/CSA-IEC CISPR 16-1-1:18  Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
(Adopted IEC CISPR 16-1-1:2010, edition 3:2010 consolidated with amendment 1:2010 and amendment 2:2014)
7/25/2018   
Electrical / Electronics  CAN/CSA-IEC CISPR 16-1-1:18  Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-1 : Appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques - Appareils de mesure
(norme IEC CISPR 16-1-1:2010 adoptée, édition 3:2010 consolidée par l'amendement 1:2010 et l'amendement 2:2014)
7/25/2018   
Life Sciences  CSA/ANSI LNG 3.1-2018  Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 1: General requirements and definitions
(Adopted ISO 12614-1:2014, first edition, 2014-07-01, with North American deviations)
7/25/2018   
Life Sciences  CSA/ANSI LNG 4.1-2018  LNG Vehicle Dispensing Systems
7/25/2018   
Life Sciences  Z1010-18   Gestion du travail dans des conditions extrêmes
7/25/2018   
Construction Products and Materials  Z797-18  Code of practice for access scaffold
7/25/2018   
Construction Products and Materials  Z462-18   Sécurité électrique au travail
7/25/2018   


Supplements

Supplements are issued periodically for some standards. This section lists those recently published.
Program Standard Title Date Posted Scope
No activity to report


Amendments

Amendments are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register Now
Program Standard Title Date Posted Scope
Electrical / Electronics  C22.2 No. 178.1-14, Update No. 2  Transfer switch equipment
Revised Cover, Copyright page, Preface, Clauses 1.1, 1.2. 3.5, 4.2.2, 5.2.1.1, 5.2.4.2,
5.2.7.10, 6.19.19, 7.1.3, 8.1.2.1, 8.1.2.2, 8.2.3.1, 9.13.2.3, 9.13.3.10,
9.13.3.11, 9.13.3.18, E1.1, E1.2, E2.3, E2.4, E2.13, E3, E4.1, E5.1, J5.4, and J6.7,
Tables 2, 25, 27, and J2, and Annex A1
New Clauses 1.1 j), 1.2 f), 1.2 g), 3.7A, 5.2.6.2.5, 8.1.2.6, E1.2 a), E1.2 b), E2.3 a) 4) –
E2.3 a) 6), E2.3 b) 5) – E2.3 b) 11), E2.3 c), E3.2, E3A, E5.1.1, E5.6 – E5.8, and
G5.2.3 and Figure E3A.1
Deleted Clauses 4.2.2 a) – d), 9.13.3.12, and 9.13.3.13
10/17/2018   
Communications / Information  Amendment 6:2018 (IDT) to CAN/CSA-ISO/IEC 14496-3:10 (R2015)  Information technology — Coding of audio-visual objects — Part 3: Audio - AMENDMENT 6: Profiles, levels and downmixing method for 22.2 channel programs
(ISO/IEC 14496-3:2009, IDT)
10/3/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60745-2-16-09 (R2014) Update No. 1  Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers
Revised Title page, copyright page, and Preface
New Clauses 3.111DV and 19.101DV
9/21/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60745-2-16-09 (C2014)  Outils électroportatifs à moteur - Sécurité - Partie 2-16 : Règles particulières pour les agrafeuses
Modification Page titre, page des droits d’auteur et préface
Ajout Articles 3.111DV et 19.101DV
9/21/2018   
Electrical / Electronics  CAN/CSA-C22.2 No. 62841-3-10:16, Update No. 1  Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines
Revised Title page, copyright page, Contents, Preface, and IEC Clause 19.101.2.1
9/21/2018   
Energy  Z276-18, Update No. 1  Liquified natural gas (LNG) - Production, storage, and handling
Clauses 1.2.2, 1.3, and 2, Annex D, Tables 1, 3, and 6, Figure 2
Errata - Technical Committee
9/5/2018   
Energy  Z276-18, Mise à jour nº1  Gaz naturel liquéfié (GNL) : production, stockage et manutention
Articles 1.2.2, 1.3 et 2, Annexe D, Tableaux 1, 3 et 6, Figure 2
Comité technique
9/5/2018   
Electrical / Electronics  Amendment 1:2018 to CAN/CSA-C22.2 No. 60601-2-6:14 / Modification 1:2018 à CAN/CSA-C22.2 n° 60601-2-6:14  Medical electrical equipment — Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment
Appareils électromédicaux — Partie 2-6 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils de thérapie à micro-ondes
9/5/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60745-2-15-10 (R2015), Update No. 5  Hand-held motor operated electric tools — Safety — Part 2-15: Particular requirements for hedge trimmers
Revised Title page, copyright page, Preface, and Clauses 8.1DV and 19.103DV
9/5/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60745-2-15-10 (C2015), Mise à jour no 5  Outils électroportatifs à moteur — Sécurité — Partie 2-15 : Règles particulières pour les taille-haies
Modification Page titre, page des droits d’auteur, préface et articles 8.1DV et 19.103DV
9/5/2018   
Electrical / Electronics  Amendment 1:2018 (IDT) to CAN/CSA-C22.2 No. 60601-2-3:14  Medical electrical equipment — Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment
(IEC 60601-2-3:2012, MOD)
8/28/2018   
Electrical / Electronics  Amendment 1:2018 (IDT) to CAN/CSA-C22.2 No. 60601-2-3:14  Appareils électromédicaux — Partie 2-3 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils de thérapie à ondes courtes
(IEC 60601-2-3:2012, MOD)
8/28/2018   
Electrical / Electronics  Amendment 1:2018 (MOD) to CAN/CSA-C22.2 No. 60601-2-50:10 (R2014)  Medical electrical equipment — Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment
(IEC 60601-2-50:2009, IDT)
8/28/2018   
Electrical / Electronics  Modification 1:2018 (MOD) à CAN/CSA-C22.2 n° 60601-2-50:10 (C2014)  Appareils électromédicaux — Partie 2-50 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils de photothérapie pour nouveau-nés
(IEC 60601-2-50:2009, IDT)
8/28/2018   
Construction Products and Materials  Z800-18  Guideline on basement flood protection and risk reduction
This is a National Standard of Canada
8/28/2018   
Electrical / Electronics  C22.2 No. 1691-12 (R2016)  Single pole locking-type separable connectors
Revised Title page, copyright page, Contents, Preface, Clauses 2.2 and 6.11.7, and
Table 4
New Supplement SA
8/22/2018   
Electrical / Electronics  C22.2 No. 1993-17, Update No. 2  Self-ballasted lamps and lamp adapters
Revised Title page, copyright page, Contents, Preface, Clauses SA8.19.1–SA8.19.4, and
Table SC4.1
New Clause SC4.5 and Figures SA8.1.1 and SC4.2
8/22/2018   
Electrical / Electronics  C22.2 No. 89-15  Swimming-pool luminaires, submersible luminaires, and accessories
Clauses 3, 6.2.3, 7.3.1, 7.3.5, 9.1.1.3, 9.1.3.4, and 12.11.1
8/22/2018   
Energy  F280-12, Mise à jour nº 2  Détermination de la puissance requise des appareils de chauffage et de refroidissement résidentiels
Articles 3.2 et 6.2.7
Tableux 6F, 6G et E.1
Figure D.1
8/22/2018   
Construction Products and Materials  A23.1-14/A23.2-14  Concrete materials and methods of concrete construction/Test methods and standard practices for concrete
Reprinted June 2018. This reprint is being issued to incorporate Updates
into the original 2014 Standard
8/21/2018   
Construction Products and Materials  A23.1-14/A23.2-14  Béton : Constituants et exécution des travaux/Méthodes d’essai et pratiques normalisées pour le béton
Réimprimée en juin 2018. Cette réimpression contient les modifications apportées à la version originale de la norme publiée en avril 2015
8/21/2018   
Construction Products and Materials  B137 Series-17, Update No. 1  Thermoplastic pressure piping compendium
B137.3-17
Figure 1
B137.8-17 (withdrawn)
Withdrawn
B137.11-17
Clause 6.2
8/21/2018   
Construction Products and Materials  CAN/CSA-A440.2-14/A440.3-14, Update No. 2  Fenestration energy performance/User Guide to CSA A440.2-14, Fenestration energy performance
Revised Clauses 1.5, 2, 3.1, 5.3, 6.3, 6.5, and Table 1
7/27/2018   


Errata

Errata are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register Now
Program Standard Title Date Posted Scope
Construction Products and Materials  AAMA/WDMA/CSA 101/1.S.2/A440-17  North American Fenestration Standard/Specification for windows, doors, and skylights
National Standard of Canada

Annex D
9/28/2018   
Electrical / Electronics  C22.1-18  Canadian Electrical Code, Part I
National Standard of Canada
Note: The error in Subrule 86-300 2) appeared in the first print
run of the 2018 CE Code, Part I. It has been corrected in
subsequent print runs.
Appendix B Notes to Rules 8-106 11), 18-050, 26-012 b), and
26-656 2)
Rules 8-200, 8-202, 10-300, 12-910, 12-2320, 18-094, 24-104,
and 86-300
Tables 1, 18, and 41
Index
9/28/2018   
Life Sciences  Z11-18  Portable ladders
National Standard of Canada

Clauses 8.2.1.8, 8.2.2.4, 8.4.6.3, and 8.5.6
Tables 1 and 14
Figure 17
9/28/2018   
Life Sciences  Z11-18  Échelles portatives
Norme nationale du Canada

Articles 8.2.1.8, 8.2.2.4, 8.4.6.3 et 8.5.6
Tableaux 1 et 14
Figure 17
9/28/2018   
Life Sciences  Z462-18  Sécurité électrique au travail
Norme nationale du Canada

Articles 3, 4.1.10.4, 4.3.7.3.10, 5.3, 6.2 et L.2
Articles 4.1.3, 4.1.4, 4.1.6.2, 4.1.6.8.1, 4.1.6.8.3, 4.1.6.8.4, 4.1.6.9, 4.1.6.10, 4.1.6.11.3, 4.1.7.1.6, 4.1.7.2, 4.1.7.3.1, 4.1.7.3.2, 4.1.9.1, 4.1.9.5, 4.1.11.2, 4.1.11.3, 4.2.1, 4.2.1.1, 4.2.1.2, 4.2.5, 4.3.2.1, 4.3.2.2.1, 4.3.2.2.2, 4.3.2.2.3, 4.3.2.2.4, 4.3.4, 4.3.4.1, 4.3.4.2, 4.3.4.3, 4.3.4.6, 4.3.5.1, 4.3.5.2, 4.3.5.3, 4.3.5.6.1, 4.3.5.6.2, 4.3.5.7, 4.3.6.1.1, 4.3.6.1.2, 4.3.6.3.2, 4.3.6.6, 4.3.6.7, 4.3.7.2, 4.3.7.3.7, 4.3.7.3.14, 4.3.7.3.15, 4.3.7.5.4, 5.2.3, 5.9.1, 6.3.2.1, 6.4, 6.5, 6.6.4, H.2, H.3, H.4, O.2.3 et O.2.4
Annexes F et K
Tableaux 1A, 1B, 2, 3, 6A, 6B, H.1 et H.2
9/28/2018   
Energy  B137 Series-17  Thermoplastic pressure piping compendium
B137.0-17 - Figures 4 and 5
B137.5-17 - Clause 5.1.7
8/29/2018   
Construction Products and Materials  CSA B45.5-17/IAPMO Z124-2017  Plastic plumbing fixtures
Clauses 3, 5.7.1.2, 5.7.1.3, and 5.20.1
Figures 3 and 9
8/29/2018   
Energy  N285.0-17/N285.6 Série-17  Exigences générales relatives aux systèmes et composants sous pression des centrales nucléaires CANDU/Normes sur les matériaux des composants de réacteurs des centrales nucléaires CANDU
Groupe de travail A et Groupe de travail B
N285.0-17
Article 7.4.2
N285.6.1-17
Aucune modification
N285.6.2-17
Aucune modification
N285.6.3-17
Aucune modification
N285.6.4-17
Aucune modification
N285.6.6-17
Aucune modification
N285.6.7-17
Tableau 2
N285.6.8-17
Aucune modification
N285.6.9-17
Aucune modification
N285.6.10-17
Aucune modification
N285.6.11-17
Aucune modification
N285.6.12-17
Aucune modification
N285.6.13-17
Aucune modification
N285.6.14-17
Aucune modification
8/1/2018   
Life Sciences  B620-14, Mise à jour no 1  Citernes routières et citernes amovibles TC pour le transport des marchandises dangereuses
Modification Articles 3.2, 5.3.2.1, 7.2.10.5, 8.3.3.2.2, E.1 et tableaux 7.1 et 7.2
7/27/2018   
Life Sciences  B620-14, Update No. 1  Highway tanks and TC portable tyanks for the transportation of dangerous goods
Clauses 1.1, 3.2, 5.3.2.1, 7.2.8, 8.1.3.2, 8.3.3.2.2, 8.3.3.3.3, and E.1and Tabl7.1
7/27/2018   
Life Sciences  B621-14, Update No. 1  Selection and use of highway tanks, TC portable tanks, and other large containers for the transportation of dangerous goods, Classes3, 4, 5, 6.1, 8, and 9
Revised Clauses 7.1 and 8.4
7/27/2018   
Life Sciences  B621-14, Mise à jour no 1  Sélection et utilisation des citernes routières, des citernes amovibles TC et autres grands contenants pour le transport des marchandises dangereuses des classes 3, 4, 5, 6.1, 8 et 9
Modification Article 8.4
7/27/2018   
Life Sciences  B622-14, Update No. 1  Selection and use of highway tanks, TC portable tanks, and ton containers for the transportation of dangerous goods, Class 2
Revised Clauses 4.2 and 6.3
7/27/2018   
Life Sciences  B622-14, Mise à jour no 1  Sélection et utilisation des citernes routières, des citernes amovibles TC et des contenants d’une tonne pour le transport des marchandises dangereuses de la classe 2
Modification Articles 4.2 et 6.3
7/27/2018   


Endorsements

This section lists endorsed standards, which are standards that have been developed by another standards development organization and approved by the appropriate CSA Technical Committee for use in Canada. Endorsed standards are not sold by CSA.
Program Standard Title Date Posted Scope
No activity to report


Reaffirmations

The standards listed in this section have been reviewed to determine if they remain technically valid and have been reaffirmed as acceptable for use until the next edition is published or for a further five years (whichever comes first).
Program Standard Title Date Posted Scope
Electrical / Electronics  C22.2 NO. 34-M1987 (R2018)  ELECTRODE RECEPTACLESFITTINGSAND CONNECTORS FOR GAS TUBES
10/19/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-1-10-09 (R2018)  Medical electrical equipment - Part 1-10: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-1-8:08 (R2018)  Medical electrical equipment - Part 1-8: General requirements forbasic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems inmedical electrical equipment and medical electrical systems
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-2-3:14 (R2018)  Medical electrical equipment - Part 2-3: Particular requirements forthe basic safety and essential performance of short-wave therapy equipment
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-2-6:14 (R2018)  Medical electrical equipment - Part 2-6: Particular requirements forthe basic safety and essential performance of microwave therapy equipment
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-2-10:14 (R2018)  Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and musclestimulators
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-2-19-09 (R2018)  Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-2-21-10 (R2018)  Medical electrical equipment - Part 2-21: Particular requirementsfor the basic safety and essential performance of infant radiant warmers
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-2-22:08 (R2018)  Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-2-26:14 (R2018)  Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-2-47-14 (R2018)  Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-2-50-10 (R2018)  Medical electrical equipment - Part 2-50: Particular requirementsfor the basic safety and essential performance of infant phototherapy equipment
10/2/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60601-2-29-10 (R2018)  Medical electrical equipment - Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators
10/2/2018   
Communications / Information  CAN/CSA-ISO/IEC 16388:08 (R2018)  Information technology - Automatic identification and data capture techniques - Code 39 bar code symbology specification
(Adopted ISO/IEC 16388:2007, second edition, 2007-05-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 16390:08 (R2018)  Information technology - Automatic identification and data capture techniques - Interleaved 2 of 5 bar code symbology specification
(Adopted ISO/IEC 16390:2007, second edition, 2007-06-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 17343:08 (R2018)  Information technology - Telecommunications and information exchange between systems - Corporate telecommunication networks - Signalling interworking between QSIG and SIP - Basic services
(Adopted ISO/IEC 17343:2007, second edition, 2007-11-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 21000-7:08 (R2018)  Information technology - Multimedia framework (MPEG-21) - Part 7: Digital item adaptation
(Adopted ISO/IEC 21000-7:2007, second edition, 2007-12-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23000-2:08 (R2018)  Information technology - Multimedia application format (MPEG-A) - Part 2: MPEG music player application format
(Adopted ISO/IEC 23000-2:2008, second edition, 2008-01-15, corrected version 2008-04-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23000-3:08 (R2018)  Information technology - Multimedia application format (MPEG-A) - Part 3: MPEG photo player application format
(Adopted ISO/IEC 23000-3:2007, first edition, 2007-06-01)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23001-1:08 (R2018)  Information technology - MPEG systems technologies - Part 1: Binary MPEG format for XML
(Adopted ISO/IEC 23001-1:2006, first edition, 2006-04-01, including technical corrigendum 1:2007 & technical cigendum 2:2007)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23001-2:08 (R2018)  Information technology - MPEG systems technologies - Part 2: Fragment request units
(Adopted ISO/IEC 23001-2:2008, first edition, 2008-02-01)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23001-5:08 (R2018)  Information technology - MPEG systems technologies - Part 5: Bitstream syntax description language (BSDL)
(Adopted ISO/IEC 23001-5:2008, first edition, 2008-02-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23002-1:08 (R2018)  Information technology - MPEG video technologies - Part 1: Accuracy requirements for implementation of integer-output 8×8 inverse discrete cosine transform
(Adopted ISO/IEC 23002-1:2006, first edition, 2006-12-01)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23002-3:08 (R2018)  Information technology - MPEG video technologies - Part 3: Representation of auxiliary video and supplemental information
(Adopted ISO/IEC 23002-3:2007, first edition, 2007-10-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23003-1:08 (R2018)  Information technology - MPEG audio technologies - Part 1: MPEG surround
(Adopted ISO/IEC 23003-1:2007, first edition, 2007-02-15, including technical corrigendum 1:2008)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23004-1:08 (R2018)  Information technology - Multimedia middleware - Part 1: Architecture
(Adopted ISO/IEC 23004-1:2007, first edition, 2007-09-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23004-3:08 (R2018)  Information technology - Multimedia middleware - Part 3: Component model
(Adopted ISO/IEC 23004-3:2007, first edition, 2007-09-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23004-4:08 (R2018)  Information technology - Multimedia middleware - Part 4: Resource and quality management
(Adopted ISO/IEC 23004-4:2007, first edition, 2007-09-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23004-5:08 (R2018)  Information technology - Multimedia middleware - Part 5: Component download
(Adopted ISO/IEC 23004-5:2008, first edition, 2008-02-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23004-6:08 (R2018)  Information technology - Multimedia middleware - Part 6: Fault management
(Adopted ISO/IEC 23004-6:2008, first edition, 2008-02-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 23004-7:08 (R2018)  Information technology - Multimedia middleware - Part 7: System integrity management
(Adopted ISO/IEC 23004-7:2008, first edition, 2008-02-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 24740:08 (R2018)  Information technology - Responsive link (RL)
(Adopted ISO/IEC 24740:2008, edition 1.0, 2008-01)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 24824-1:08 (R2018)  Information technology - Generic applications of ASN.1: Fast infoset
(Adopted ISO/IEC 24824-1:2007, first edition, 2007-05-01)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 24824-2:08 (R2018)  Information technology - Generic applications of ASN.1: Fast web services
(Adopted ISO/IEC 24824-2:2006, first edition, 2006-07-01)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 26800:08 (R2018)   Information technology - Open document format for office applications (OpenDocument) v1.0
(Adopted ISO/IEC 26300:2006, first edition, 2006-12-01)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 7816-13:08 (R2018)  Identification cards - Integrated circuit cards - Part 13: Commands for application management in a multi-application environment
(Adopted ISO/IEC 7816-13:2007, first edition, 2007-03-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 7816-2:08 (R2018)  Identification cards - Integrated circuit cards - Part 2: Cards with contacts - Dimensions and location of the contacts
(Adopted ISO/IEC 7816-2:2007, second edition, 2007-10-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 9579:04 (R2018)  Information Technology - Remote Database Access for SQL with Security Enhancement (
Adopted ISO/IEC 9579:2000, second edition, 2000-02-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC TR 14165-117:08 (R2018)  Information technology - Fibre channel - Part 117: Methodologies for jitter and signal quality (MJSQ)
(Adopted ISO/IEC TR 14165-117:2007, edition 1.0, 2007-09)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC TR 14471:08 (R2018)  Information technology - Software engineering - Guidelines for the adoption of CASE tools
(Adopted ISO/IEC TR 14471:2007, second edition, 2007-10-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC TR 14496-24:08 (R2018)  Information technology - Coding of audio-visual objects - Part 24: Audio and systems interaction
(Adopted ISO/IEC TR 14496-24:2008, first edition, 2008-01-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC TR 19768:08 (R2018)  Information technology - Programming languages - Technical report on C++ library extensions
(Adopted ISO/IEC TR 19768:2007, first edition, 2007-11-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC TR 23000-1:08 (R2018)  Information technology - Multimedia application format (MPEG-A) - Part 1: Purpose for multimedia application formats
(Adopted ISO/IEC TR 23000-1:2007, first edition, 2007-02-01)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC TR 24750:08 (R2018)  Information technology - Assessment and mitigation of installed balanced cabling channels in order to support 10GBASE-T
(Adopted ISO/IEC TR 24750:2007, first edition, 2007-07)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC-10027-95 (R2018)  Information Technology - Information Resource Dictionary System (IRDS) Framework
(Adopted ISO/IEC 10027:1990)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC-10728-95 (R2018)  Information Technology - Information Resource Dictionary System (IRDS) Services Interface
(Adopted ISO/IEC 10728:1993)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC-8613-7-95 (R2018)  Information Technology - Open Document Architecture (ODA) and Interchange Format: Raster Graphics Content Architectures
(Adopted ISO/IEC 8613-7:1994, second edition, 1994-11-01)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC-8613-8-95 (R2018)  Information Technology - Open Document Architecture (ODA) and Interchange Format: Geometric Graphics Content Architectures
(Adopted ISO/IEC 8613-8:1994, second edition, 1994-11-01)
9/27/2018   
Communications / Information  CAN/CSA-Z243.101-89 (R2018)  Information Processing Systems - Open Systems Interconnection - LOTOS - A Formal Description Technique Based on the Temporal Ordering of Observational Behaviour
(Adopted ISO 8807:1989)
9/27/2018   
Communications / Information  CAN/CSA-Z243.210.1-89 (R2018)  Information Processing - SGML Support Facilities - Techniques for Using SGML
(Adopted ISO/IEC TR 9573:1988)
9/27/2018   
Communications / Information  CAN/CSA-Z243.58-92 (R2018)  Information Technology Vocabulary
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 15459-5:08 (R2018)  Information technology - Unique identifiers - Part 5: Unique identifier for returnable transport items (RTIs)
(Adopted ISO/IEC 15459-5:2007, first edition, 2007-06-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 15459-6:08 (R2018)  Information technology - Unique identifiers - Part 6: Unique identifier for product groupings
(Adopted ISO/IEC 15459-6:2007, first edition, 2007-06-15)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 15939:08 (R2018)  Systems and software engineering - Measurement process
(Adopted ISO/IEC 15939:2007, second edition, 2007-08-01)
9/27/2018   
Communications / Information  CAN/CSA-ISO/IEC 10918-3-00 (R2018)  Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Extensions
(Adopted ISO/IEC 10918-3:1997, first edition, 1997-05-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 11586-1-00 (R2018)  Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Overview, Models and Notation
(Adopted ISO/IEC 11586-1:1996, first edition, 1996-06-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 11586-2-00 (R2018)  Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) Service Definition
(Adopted ISEC 11586-2:1996, first edition, 1996-06-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 11586-3-00 (R2018)  Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) Protocol Specification
(Adopted ISO/IEC 11586-3:1996, first edition, 1996-06-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 11586-4-00 (R2018)  Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Protecting Transfer Syntax Specification
(Adopted ISO/IEC 11586-4:1996, first edition, 1996-06-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 13719-1-00 (R2018)  Information Technology - Portable Common Tool Environment (PCTE) - Part 1: Abstract Specification
(Adopted ISO/IEC 13719-1:1998, second edition, 1998-10-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 13719-3-00 (R2018)  Information Technology - Portable Common Tool Environment (PCTE) - Part 3: Ada Programming Language Binding
(Adopted ISO/IEC 13719-3:1998, second edition, 1998-10-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 13816:08 (R2018)  Information technology - Programming languages, their environments and system software interfaces - Programming language ISLISP
(Adopted ISO/IEC 13816:2007, second edition, 2007-10-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 14165-331:08 (R2018)  Information technology - Fibre channel - Part 331: Virtual interface (FC-VI)
(Adopted ISO/IEC 14165-331:2007, first edition, 2007-07)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 14165-414:08 (R2018)  Information technology - Fibre channel - Part 414: Generic services-4 (FC-GS-4)
(Adopted ISO/IEC 14165-414:2007, first edition, 2007-05)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 14496-23:08 (R2018)  Information technology - Coding of audio-visual objects - Part 23: Symbolic music representation
(Adopted ISO/IEC 14496-23:2008, first edition, 2008-02-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 14543-3-5:08 (R2018)  Information technology - Home electronic system (HES) architecture - Part 3-5: Media and media dependent layers - Powerline for network based control of HES class 1
(Adopted ISO/IEC 14543-3-5:2007, first edition, 2007-05)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 14776-331:04 (R2018)  nformation Technology - Small Computer System Interface (SCSI) - Part 331: Stream Commands (SSC)
I(Adopted ISO/IEC 14776-331:2002, first edition, 2002-09
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 15417:08 (R2018)  Information technology - Automatic identification and data capture techniques - Code 128 bar code symbology specification
(Adopted ISO/IEC 15417:2007, second edition, 2007-06-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 15434:08 (R2018)  Information technology - Automatic identification and data capture techniques - Syntax for high-capacity ADC media
(Adopted ISO/IEC 15434:2006, third edition, 2006-10-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 15444-11:08 (R2018)  Information technology - JPEG 2000 image coding system: Wireless
(Adopted ISO/IEC 15444-11:2007, first edition, 2007-04-15)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 15444-3:08 (R2018)  Information technology - JPEG 2000 image coding system: Motion JPEG 2000
(Adopted ISO/IEC 15444-3:2007, second edition, 2007-05-01)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 15444-4:08 (R2018)  Information technology - JPEG 2000 image coding system: Conformance testing
(Adopted ISO/IEC 15444-4:2004, second edition, 2004-12-15)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 15444-8:08 (R2018)  Information technology - JPEG 2000 image coding system - Part 8: Secure JPEG 2000
(Adopted ISO/IEC 15444-8:2007, first edition, 2007-04-15)
9/20/2018   
Communications / Information  CAN/CSA-ISO/IEC 15457-2:08 (R2018)  Identification cards - Thin flexible cards - Part 2: Magnetic recording technique
(Adopted ISO/IEC 15457-2:2007, second edition, 2007-06-15)
9/20/2018   
Electrical / Electronics  C22.2 NO. 1335.1-93 (R2018)  PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS
9/19/2018   
Electrical / Electronics  C22.2 NO. 1335.2.14-93 (R2018)  PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: PARTICULAR REQUIREMENTS FOR ELECTRICAL MOTOR-OPERATED KITCHEN APPLIANCES
9/19/2018   
Electrical / Electronics  C22.2 NO. 105-1953 (R2018)  ELECTRICAL EQUIPMENT FOR WOODWORKING MACHINERY
9/19/2018   
Electrical / Electronics  C22.2 NO. 47-13 (R2018)  Air-cooled transformers (dry type)
9/19/2018   
Communications / Information  CAN/CSA-ISO/IEC 21000-18:08 (R2018)  INFORMATION TECHNOLOGY - MULTIMEDIA FRAMEWORK (MPEG-21) - PART 18: DIGITAL ITEM STREAMING
9/19/2018   
Communications / Information  CAN/CSA-ISO/IEC 23004-2:08 (R2018)  INFORMATION TECHNOLOGY - MULTIMEDIA MIDDLEWARE - PART 2: MULTIMEDIA APPLICATION PROGRAMMING INTERFACE (API)
9/19/2018   
Communications / Information  CAN/CSA-ISO/IEC 13712-2-00 (R2018)  INFORMATION TECHNOLOGY - REMOTE OPERATIONS: OSI REALIZATIONS - REMOTE OPERATIONS SERVICE ELEMENT (ROSE) SERVICE DEFINITION
9/19/2018   
Construction Products and Materials  CAN/CSA-A440.2-14/A440.3-14 (R2018)  Fenestration energy performance/User Guide to CSA A440.2-14 Fenestration energy performance
9/17/2018   
Electrical / Electronics  C22.2 NO. 156-M1987 (R2018)  SOLID-STATE SPEED CONTROLS
9/10/2018   
Construction Products and Materials  CAN/CSA-A123.2-03 (R2018)  ASPHALT COATED ROOFING SHEETS
9/4/2018   
Construction Products and Materials  CAN/CSA-A123.4-04 (R2018)  ASPHALT FOR CONSTRUCTING BUILT-UP ROOF COVERINGS AND WATERPROOFING SYSTEMS
9/4/2018   
Electrical / Electronics  C22.2 NO. 10-1965 (R2018)  ELECTRIC FLOOR SURFACING AND CLEANING MACHINES
8/30/2018   
Construction Products and Materials  A231.1-14/A231.2-14 (R2018)  PRECAST CONCRETE PAVING SLABS/PRECAST CONCRETE PAVERS
8/30/2018   
Electrical / Electronics  C22.2 NO. 82-1969 (R2018)  TUBULAR SUPPORT MEMBERS AND ASSOCIATED FITTINGS FOR DOMESTIC AND COMMERCIAL SERVICE MASTS
8/28/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60745-2-23-13 (R2018)  Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools
8/28/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60947-1-13 (R2018)  Low-voltage switchgear and controlgear - Part 1: General rules
8/15/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60335-2-45:14 (R2018)  HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES
8/15/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 60335-2-44:14 (R2018)  HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-44: PARTICULAR REQUIREMENTS FOR IRONERS
8/15/2018   
Construction Products and Materials  W55.3-08 (R2018)  Certification of companies for resistance welding of steel and aluminum
8/8/2018   
Energy  CAN/CSA-Z19902-09 (R2018)  PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
8/7/2018   
Electrical / Electronics  C22.2 NO. 8-13 (R2018)  ELECTROMAGNETIC INTERFERENCE (EMI) FILTERS
8/7/2018   
Construction Products and Materials  CAN/CSA-ISO 20121:13 (R2018)  Event sustainability management systems - Requirements with guidance for use
8/7/2018   
Electrical / Electronics  CAN/CSA-C22.2 NO. 110-94 (R2018)  Construction and Test of Electric Storage - Tank Water Heaters
7/24/2018   


Withdrawals

The standards listed in this section have been withdrawn. Most withdrawn standards are available from our archived collection.
Program Standard Title Date Posted Scope
Environment  Z771-04 (R2014)  ENVIRONMENTAL MANAGEMENT SYSTEMS FOR HOG OPERATIONS: REQUIREMENTS
10/2/2018   
Electrical / Electronics  CAN/CSA-C867.1-08 (R2013)  PERFORMANCE OF TORCHIERES
8/21/2018   


Current List of Endorsed Standards

Current List of Endorsed Standards View Detail


Formal Interpretations

This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate committee. View Detail


Informs & Certification Notices

This section lists notices that are published by Certification and Testing. An Informs Notice contains information only. A Certification Notice announces changes that may affect product certification. Please allow time for page to load. View Detail